Locating A Disc By Name; List-Up; Selecting The Specific Tracks For Playback; Bank - Sony CDX-C610RDS Bedienungsanleitung

Displaying the disc memo
Press (DSPL) during CD playback.
CD1 DISC NAME
DISC
SUR
1 SCHUBERT
EQ
Each time you press (DSPL) during CD
playback, the item changes as follows:
z Elapsed playback time
Clock Z
Erasing the disc memo
1
Press (SOURCE) to select the CD changer
(for example CD2 or CD3).
2
Press (LIST) for two seconds.
3
Press (DSPL) for two seconds.
4
Press (+) or (–) to select the name that
you want to erase.
5
Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 4 and 5 if you want to erase
other names.
6
Press (LIST) for two seconds.
The unit returns to the normal CD playback
mode.

Locating a disc by name

— List-up (CD changer with custom file
function or MD changer)
You can use this function for the discs that
have been assigned a custom name. For more
information on disc names, refer to "Labeling a
CD" (page 18).
1
Press (LIST) momentarily.
The name assigned to the disc currently
playing appears in the display.
LST
DISC
SUR
1 SCHUBERT
EQ
ENTER
2
Press (LIST) repeatedly until you find the
desired disc.
3
Press (5) (ENTER) to play back the disc.
Actual total number:
Notes
• Once a disc name has been displayed for five seconds, the
display goes back to its normal playback mode. To turn
off the display, press (DSPL).
• The track names are not be displayed during MD
playback.
• If there are no discs in the magazine, "NO DISC"
appears in the display.
• If a disc has not been assigned a custom file, "********"
appears in the display.
• If the disc information has not been read by the unit,
z Disc Name
"NOT READ" appears in the display. To load the disc,
first press the number button, then choose the disc that
has not been loaded.
• The information is appears only in upper cases. There are
also some letters which cannot be displayed (during MD
playback).
Selecting the specific
tracks for playback

— Bank

(CD changer with custom file function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
1
Start playing the disc and press (SHIFT).
Then press (3) (PLAY MODE) for two
seconds.
Bank edit mode
CD2
SUR
EQ
Note
If you have not labeled the disc, the bank edit mode
does not appear and the programme edit mode appears.
To go back to the normal playback mode, press
(SHIFT).
2
Press either side of (SEEK/AMS) to select
the track number you want to skip and
press (5) (ENTER).
CD2
SUR
EQ
The indication changes from "PLAY" to
"SKIP." If you want to return to "PLAY,"
press (5) (ENTER) again.
3
Repeat step 2 to set the "PLAY" or "SKIP"
mode on all the tracks.
Sony CDX-C610RDS (
DISC TRACK
5 1
PLAY MODE ENTER
DISC TRACK
5 3 S K I P
PLAY MODE ENTER
continue to next page n
E
,F,G,I) 3-856-122-12(2)
EN
19