Technical Specifications; Technical Support - Thitronik WiPro III Bedienungsanleitung

WiPro III Operating Instructions

3.1 Technical specifications

Main unit
Power supply (Uin):
Siren output:
Indicator output:
Current consumption:
Assignable transmitters max:
Receiving frequency:
Number of codes:
Temperature range:
Interfaces:
Remote control 868, magnetic contact 868
Transmission power:
Range max:
Battery type (transmitter):
Battery life (transmitter):
Transmitting frequency:
Number of codes:
Temperature range:
3.2 Approvals
E1 This alarm system for recreational vehicles is tested and
approved according to ECE regulation no. 10, revision 03.
3.3 Disposal instructions
When decommissioning the device, do not dispose of it with
household waste. Municipal recycling centres have suitable
containers for the disposal of electronic equipment.

3.4 Technical support

If there is a problem which cannot be eliminated with
the aid of this manual when using this system,
please consult your specialist dealer:
Serial number of the unit:
If your specialist dealer is unable to help, please contact our technical support:
+49 (0)431 66 66 8 11
As with any other alarm system, WiPro III can only report a break­in or attempted
break­in, but it cannot prevent it. Therefore, be wise and do not leave any valuables on view
or where they are easily accessible in the vehicle or leave the vehicle unlocked.
Thitronik does not accept any liability for stolen valuables or damage to the vehicle
9 – 30V
9-30V (Uin)/ 1 A
60W
approx. 11 mA
100
868.35 Mhz
>4 billion. (>4,000,000,000)
–10 °C to +80 °C
RJ11 (output for Pro-finder for alarm forwarding)
CAN bus interface
<10 mW
75 m in the open
CR2032 (button cell / 3 V)
approx. 2 years
868.35 Mhz
>4 billion. (>4,000,000,000)
–10 °C to +60 °C
Disclaimer:
caused by a break­in.
Page 8
GB