Handling The System; Controlling The System Using A Wireless Remote Control - Thitronik WiPro III Bedienungsanleitung

WiPro III Operating Instructions

1. Handling the system

Please read the following instructions carefully to avoid
faulty operation.
1.1 Controlling the system with the remote key fob
The "Lock" button arms the system.
Only possible with the vehicle doors closed.
T o arm the system on Ford Transits, briefly press the
button twice in succession.
T he vehicle indicators flash once or twice (depending on the vehicle type),
the interior beeper sounds once and the status LED starts to flash.
GB
The "Unlock" button disarms the system.
T he vehicle indicators flash once or twice (depending on the vehicle type),
the interior beeper sounds twice and the status LED stops flashing.

1.2 Controlling the system using a wireless remote control

Any button arms the system.
The vehicle indicators flash once, the interior beeper sounds once and
the status LED starts to flash.
The circuit will still be armed even if the original vehicle doors are open.
Any button disarms the system.
T he vehicle indicators flash twice, the interior beeper sounds twice and
the status LED stops flashing.
1.3 Activating the panic alarm
If you feel threatened while you are in the vehicle, use the panic alarm function
to draw attention. With a panic alarm, the siren, indicators and horn are activated
depending on the type of vehicle.
I f a Pro-finder is connected, an emergency SMS with the last known position
will be sent to all destination numbers. A panic alarm can be activated with the
system armed or disarmed.
The panic alarm is activated by pressing both buttons on the wireless remote control
simultaneously.
The panic alarm is deactivated by pressing any button on the wireless remote control.
If the interior beeper makes a series of beeps when
locking the vehicle, one or more wireless contacts are
open but the system still arms itself
(see 1.4 ventilation function).
Page 1