Inhaltsverzeichnis
Werbung
surfaces of the meter, other than the sensor surface, may be wiped
with a clean, damp cloth. It is recommended that this procedure is
performed after each use and all used cardboard mouthpieces
discarded.
Important note: The sensor surface must not be wiped with any
aqueous solutions and must not be exposed to solvents e.g. alcohol
or permanent damage may result.
Servicing
If your unit requires service or repair please see page 75 for contact
details. A full service manual including circuit diagram and parts list
is available upon request.
Consumables / Supporting Products
Cat. No.
36-PSA1200
36-PSA2000
36-BAT1002
36-MEC1184
36-MCG020
36-MGA222
36-MEC1007
36-CAB1000
Description
22mm disposable cardboard mouthpieces (250 per box)
22 mm mouthpiece adaptors (pack of 10)
Alkaline PP3 Battery
Calibration Tool
MicroCan calibration gas. 20 litres of gas in a 1 litre
canister. 20ppm Carbon Monoxide, balance air.
Stainless steel valve for calibration canisters with
flow Indicator
22mm reducing connector for calibration
Interface cable for COBRA software
17
Werbung
Inhaltsverzeichnis
