Intended Use; Description Of The Parts / Supplied Parts - BOMANN KM 1390 CB Bedienungsanleitung

CAUTION:
• Do not immerse the device into water for cleaning. Please follow
the instructions as stipulated in the chapter "Cleaning".
• Do not fill the vessels with any hard food such as coffee beans,
nutmeg or large pieces of cooking chocolate! The knives may be
damaged by doing so!
• The device is equipped with safety switches. Do not operate the
appliance if there is a fault or if the safety switches have been tam-
pered with!
• Place the device on a flat, level and sturdy surface.
• Do not operate the appliance without any content.
• Only process foodstuffs with this device.
• Never turn off the appliance by turning the blender jug or the bowl or
the lid of the bowl. Always use the knob when turning off the appli-
ance.
• Do not move the appliance during operation; always turn it off first
and disconnect from mains power supply. Always carry the appli-
ance with both hands!

Intended Use

This appliance is designed as a
• kneading / mixing machine for preparing dough, crèmes,
cream, whipped egg white;
• multi-chopper for the chopping of easy to cut food;
• citrus press for extracting the juice from citrus fruit;
• blender to puree, whip or mix.
It is designed solely for these purposes and may only be
used for them.
It may only be used in the manner described in this instruc-
tion manual.
The appliance may not be used for commercial purposes.
Any other use is considered not as intended and may lead to
damage to property or even personal injury.
The manufacturer assumes no liability for damage resulting
from use other than the intended purpose.
KM1390CB_IM

Description of the Parts / Supplied parts

1 Small tamper
2 Large tamper
3 Lid of the working bowl with feed shaft
4 Attachment taper for dicing blade and kneading hook
5 Kneading / Stirring tool
6 Working bowl
7 Guide pin
8 Drive shaft
9 Motor housing
10 Control knob
11 Citrus press cone
12 Filter sieve
13 Grater insert
14 French fries insert / Julienne insert
15 Cutting insert
16 Attachment holder for grater and cutting inserts
17 Dicing blade
18 Blender jug cap
19 Blender jug lid with filler hole
47
13.06.16