Austroflamm LOUNGE Benutzerhandbuch Seite 10

Lounge/Lounge Xtra 8 english
5. LOUNGE/LOUNGE XTRA Accessories
Xtra heat storing technology
The model Lounge Xtra has been equipped with the unique Xtra heat storing technology. This technology
is based on the patented Heat Memory System, but also on the special flue gas guidance and the
convection air which can be regulated or shut off completely. Consequently a fast heating system is being
combined with an extraordinarily efficient heat storing.
The convection air can be regulated according to demand with the attached lever (see picture). The more
the convection air outlets of the top plate are open, the faster heat but less heat storing can be reached. A
closed top plate will however lead to slow heat and longer heat storing.
Our hint: while the fire still burns let the convection air outlets open; close them after the fire has burnt
down in order to reach a steady heat emission.
Self-locking door mechanism
In order to ensure a correct self-locking door mechanism it is necessary, to let the door fall into the lock
with an opening angle of min. 30 °.
Operation with external air supply
The German institute for constructional engineering (DIBT) has given the Lounge/LoungeXtra the general
technical approval for operation with exteranl air supply. If the combustion air is being supplied directly to the
furnace by an air-tight pipe including closing mechanism from the outside, then the stove may be used in
residential property with mechanical ventilation.
If the stove in being used like that, a multiple stove installation on the same chimney is forbidden.
.
This stove has been approved by the German DIBT