First Installation - Philips HD8827 Bedienungsanleitung

English
8

First installation

15 cm
15 cm 15 cm
15 cm 15 cm
15 cm 15 cm
15 cm
4 ON/OFF button
5 AROMA STRENGTH button
6 HOT WATER/ STEAM button
7 Descaling cycle light
8 CALC CLEAN button
9 Rinse cycle light
10 General warning light
11 No coffee light
12 Empty coffee grounds container light
13 No water light
14 Coffee dispensing spout
15 Classic milk frother
16 Lid of the water tank
17 Lid of the bean hopper
18 Main switch
19 Socket for cord
20 Service door
21 Grinder adjustment knob
22 Water tank
23 Brew group
24 Inside of maintenance door with cleaning instructions
25 Coffee exit duct
26 Coffee residues drawer
27 Drip tray full indicator
28 Coffee grounds container
29 Drip tray
30 Drip tray cover
31 Cord
32 Cleaning brush
33 Grease
34 Water hardness tester
35 Multifunctional tool (grinder adjustment key and coffee duct cleaning
tool)
This machine has been tested with coffee. Although it has been carefully
cleaned, there may be some coffee residues left. We guarantee, however,
that the machine is absolutely new.Like with most full-automatic machines,
you first need to brew some coffees to enable the machine to complete its
self-adjustment and get the best tasting coffee.
1 Remove all packaging material from the machine.
2 Place the machine on a table or worktop away from the tap, the sink and
heat sources.
Note: Leave at least 15 cm of free space above, behind and on both sides
of the machine.
3 Note: This machine may only be operated by a properly trained person.
Never let the machine operate unattended.