HEYLO DG 25 S Bedienungsanleitung Seite 23

Switching on (DG 25 S and DG 45 S)
1. Turn switch C on to "HEAT." Now the fan blower will start.
2. Keep button A (gas valve) pressed down and press button B (piezo ignition)
several times simultaneously.
You will hear the gas flowing in. After simultaneous operation of the ignition a
flame starts burning.
3. Now hold the gas valve A down for about 10 seconds to activate the flame control.
After a maximum of 10 seconds, the flame will burn on its own.
4. You can now set performance with the gas pressure regulator.
Switching off (DG 25 S and DG 45 S)
1. Turn off switch C.
2. Let the device cool before dismantling or transporting it.
3. Shut the gas tap.
A B C
Setting gas pressure/performance
23 EN