Keypad; Power Supply - QEO Geo5X-L360 HP Bedienungsanleitung

KEYPAD

1. ON/OFF LED
2. ON/OFF receiving mode
3. LED receiving mode
4. LED MANUAL mode
5. ON/OFF MANUAL mode
6. Vertical laser line V2
7 . Horizontal laser line H
8. Vertical laser line V1

POWER SUPPLY

Both the standard Li-Ion battery or alkaline batteries can be used.
Li-Ion battery pack
Geo5X-L360 HP comes with a Li-Ion rechargeable battery pack. Open the battery door and remove the
Li-Ion battery pack. Connect the AC/DC converter with the Li-Ion battery pack. When the battery is fully
charged set the Li-Ion battery pack back into the battery slot.
Battery status
Permanent red light (at the charger) indicates that the battery is being charged.
Permanent green light (at the charger) indicates that the battery is fully charged.
The working time with fully charged battery pack is approx. 10 hrs.
If the power LED starts flashing the battery must be charged.
Alkaline batteries
Geo5X-L360 HP can be used with alkaline batteries alternatively. Please use the separate battery case
(in the kit.) Unscrew the lock of the battery door and remove the Li-Ion battery pack. Insert 3 x AA alkali-
ne batteries into the alkaline battery case (take care of correct polarity!) Whilst use of alkaline batteries
the recharging function is disabled.
3
2
1
8
4 5
6
7
EN
C
D
13