Software Update; Setup Wizard; Info - Albrecht DR 315 C Bedienungsanleitung

9.6

Software update

From time to time, Frontier Silicon may make software
upgrades available with bug fixes and/or additional
features. You can either check manually, or set
DR 315 C to check periodically automatically (this is
the default). If DR 315 C detects that newer software
is available, it asks if you want to go ahead with an
update. If you agree, the new software is then
downloaded and installed. After a software upgrade,
all user settings are maintained.
CAUTION: Before starting a software upgrade, ensure
that DR 315 C is plugged into a stable mains power
connection. Disconnecting power during a software
update may permanently damage the unit.
To turn automatic checking on or off, select Menu >
System settings > Software update > Auto-check setting.
9.7

Setup Wizard

This allows you to run the Setup wizard at any time. Guides you through the essential settings
in the following order:
1. Date/Time – Set format
2. Auto update – select clock update source or No Update.
3. Set Time/Date (this step is only needed if the 'No Update' option is selected in Auto update)
4. Network wizard automatically runs (see section 8.2.1 Network Wizard)
Once you are connected to a network the wizard is completed.
9.8

Info

Shows details of the current system Including:
• SW Version: Software version number
• Radio ID: Unique code used to identify this particular radio device.
• Friendly name: (name by which the radio is identified on a network.)
58
English