Network; Network Wizard - Albrecht DR 315 C Bedienungsanleitung

9.2

Network

• Network wizard

• PBC Wlan setup
• View settings
• Wlan region
• Manual settings
• Network profile
DR 315 C is compatible with all common network protocols and encryption methods, including
Wi-Fi Protected Setup (WPS).
To connect DR 315 C to your network, you need to the following:
• A Wi-Fi wireless router, together with passphrase key, if set.
To select a network use either the Network wizard or Manual settings.
9.2.1 Network Wizard
This guides you through the necessary steps to join a network. This is also automatically run as
part of the Setup wizard. The screens and options presented will depend on the type of network
and network protection used.
Selecting a network
When the Network wizard is chosen DR 315 C automatically scans for available wireless networks
and presents a list of SSID's (Service Set Identifier) for the networks. Those options starting with
WPS in brackets indicates encrypted networks offering Wi-Fi Protected Setup (WPS) options, for
further details see under section 8.2.2 WPS Setup (Wi-Fi Protected Setup).
DR 315 C remembers login details for the last four wireless networks it has connected to and
will automatically connect to them when they are available. If connection to a network is
temporarily lost, DR 315 C will automatically reconnect.
Wi-Fi network (SSID)
select a network from the list.
If the network is open (non-encrypted), DR 315 C
connects and no further details are required, see
Completion below.
Standard encrypted network
If the wireless network is protected the next screen presents options to enter the network key
or passphrase.
54
English