Hitachi CP-A300N Bedienungsanleitung Seite 209

Connection to the ports
NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the
input ports of the projector are recessed.
►Only the signal that is input from the COMPUTER IN1 or IN2 can be output
from the MONITOR OUT port.
TYPE A
DC5V
A
COMPUTER IN1,
D-sub 15pin mini shrink jack
(1) for PC signal
• Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive)
• H/V. sync. Signal: TTL level (positive/negative)
• Composite sync. Signal: TTL level
Pin
Video Red
1
2 Video Green
Video Blue
3
4 (No connection)
Ground
5
6 Ground Red
Ground Green
7
Ground Blue
8
9 (No connection)
(2) for Component signal
• Y : Component video Y with composite sync, 1.0±0.1 Vp-p, 75 Ω terminator
• Cr/Pr : Component video Cr/Pr, 0.7±0.1 Vp-p, 75 Ω terminator
• Cb/Pb : Component video Cb/Pb, 0.7±0.1 Vp-p, 75 Ω terminator
System:480i@60,480p@60,576i@50,576p@50,720p@50/60,1080i@50/60,1080p@50/60
Pin
Cr/Pr
1
2 Y
Cb/Pb
3
4 (No connection)
Ground
5
6 Ground Cr/Pr
Ground Y
7
Ground Cb/Pb
8
USB TYPE B
USB
0.5A
MONITOR OUT
CONTROL
B COMPUTER IN2,
Signal
Signal
B
COMPUTER IN2
HDMI
MIC
AUDIO IN1 AUDIO IN3
C
AUDIO IN2
C MONITOR OUT
Pin
10 Ground
(No connection)
11
: SDA (DDC data)
A
12
: (No connection)
B ,
C
H. sync / Composite sync.
13
14 V. sync.
: SCL (DDC clock)
A
15
: (No connection)
,
B C
-
Pin
9 (No connection)
10 Ground
(No connection)
11
12 (No connection)
(No connection)
13
14 (No connection)
(No connection)
15
-
3
Connection to the ports
A
COMPUTER IN1
S-VIDEO
AUDIO OUT
VIDEO
Signal
-
Signal
-