Creating A Programme; Programme Memory - Sony XR-C900RDS Bedienungsanleitung

Creating a programme

— Programme Memory (CD/MD changer
with programme memory function)
You can play the tracks in the order you want
by making your own programme. You can
make two programmes: Programme 1 and
Programme 2. You can select up to 12 tracks in
each programme. You can store the
programmes in memory.
1
Press (SHIFT), then press (3) (P.MODE)
for two seconds.
Programme edit mode
CD1
2 12 P1.‚3
EQ SUR
DISC
"P1" shows Programme 1 is selected.
If you have labeled the disc, the bank edit
mode appears. Press (3) (P.MODE) to
display "PGM edit" above.
EN
To select Programme 2, press (4) (n)
repeatedly until "P 2" appears.
2
Select the track you want.
1 Press (SOURCE) repeatedly to select
the changer.
2 Press (SHIFT), then press the number
button to select the disc.
3 Press (SHIFT).
4 Press either side of (SEEK/AMS) to
select the track.
3
Press (5) (ENTER) momentarily.
P1
EQ SUR
CD1
3
EQ SUR
DISC
4
To continue entering tracks, repeat steps
2 and 3.
5
When you finish entering tracks, press
(3) (P.MODE) for two seconds.
6
Press (SHIFT).
18
PGM edit
TRACK
PGM edit
+Enter+
µ
PGM edit
2 P1.‚2
TRACK
Notes
• "*Wait*" appears in the display while the unit is reading
the data, or when a disc has not been put into the unit.
• "*Mem full*" appears in the display when you try to
enter more than 12 tracks into a programme at one time.
Playing the stored programme
Changing the disc order in the changer will not
affect program memory play.
You can select:
•PGM 1 to play Programme 1.
•PGM 2 to play Programme 2.
•PGM 1+2 to play Programmes 1 and 2.
1
Press (SHIFT).
2
Press (3) (P.MODE) repeatedly until
"PGM" appears.
3
Press (4) (n) repeatedly until the
desired programme appears.
Programme play starts.
Programme 1 Playback
CD1
PGM 1
EQ SUR
µ
Programme 2 Playback
CD1
PGM 2
EQ SUR
µ
Programmes 1 and 2 Playback
CD1
PGM 1+2
EQ SUR
µ
Normal Playback
CD1
PGM off
EQ SUR
4
Press (SHIFT).
To go back to the normal playback mode,
select "PGM off" in step 3 above.
Notes
• If you press the number button during programme
memory play, programme memory play is interrupted,
and playback of the selected disc starts.
• "NO Data" appears in the display if no track is stored in
the programme.
• If a track stored into the programme memory is not in the
disc magazine, the track will be skipped.
• When the disc magazine contains not a single track
stored into the programme memory, or when the
programme information has not been loaded yet, "Not
Ready" appears.
PGM1
PGM 2
+
PGM1 2