Teletext Function; Basic Operation; Using The List Mode; Hold - JVC PD-42V31BJE Bedienungsanleitung

Teletext function

Basic operation

1 Choose a TV channel with a teletext broadcast
2 Make sure you set the VCR/TV/DVD switch to
the TV position.
3 Press g g g g (Text) button to display the teletext
Pressing g (Text) button changes the mode as follows:
TV mode
D1043
4 Choose a teletext page by pressing the p p p p p
buttons, number buttons or colour buttons
To return to the TV mode:
Press the b button or g (Text) button.
• If you have trouble receiving teletext broadcasts,
consult your local dealer or the teletext station.
• The ZOOM function will not work in the TV and text
mode or Text mode.
• You cannot operate menus when viewing a teletext
programme.
• Language display depends on the country which was
set on the COUNTRY menu. If characters on a
Teletext programme do not appear properly, change
the COUNTRY Setting to other country's. For detail,
"Changing the COUNTRY setting" on page 36.
When viewing a teletext programme, the text
periodically moves a little at a time towards either the
top or bottom of the screen. This is to prevent burn-in
and is not a malfunction.
18
TEXT ---
TEXT ---
TV and text mode
TEXT ---
TEXT ---
Text mode

Using the List Mode

You can store the numbers of your favourite teletext pages
in memory and call them up quickly using the colour
buttons.
To store the page numbers:
1 Press B B button to go into the List mode
B B
The page numbers you have stored are displayed at the
bottom of the screen.
2 Press a Colour button to choose a position.
Then press the Number buttons to enter the
page number
3 Press and hold down A A A A (Store) button
The four page numbers blink white to show that they are
stored in memory.
To call up a stored page:
p p p
1 Press the B
2 Press a colour button having a stored page
To exit the List mode:
Press the B button again.

Hold

You can hold a teletext page on the screen for as long as
you want, even while several other teletext pages are being
received.
Press the C
Hold indication
To cancel the Hold function:
Press C (Hold) button again.
• The Hold function is cleared if no operation is performed
for approximately one minute.
B button to engage the List mode
B B
C (Hold) button C C