Operations With The Setup Menu - JVC RM-LP55 Bedienungsanleitung

OPERATIONS WITH THE SETUP MENU

W.PAINT GAIN SHUTTER IRIS MANU
MENU FUNC1
B C
●
The setup menu can be accessed via the
MENU button and displayed on the LCD panel.
Setting items can be selected and set as
required.
1.
Press either MENU button B (
select desired Menu item on the LCD.
2.
Setting procedure varies for each item. To set
data, follow the procedure for each item as
described in the following sections.
● A 10-item (1 to 10) is available at the
maximum. (The features that are not available
on the camera will not be displayed)
Press MENU B to select the menu.
●
● After maximum menu item number, there are
no further indications (nothing will be displayed
on the LCD.
Menu No.
1 1: CAM MODE
2 2: CONTOUR
3 3: SC FINE COARSE
4 4: H.PHASE
5 5: GAMMA
6 6: IRIS DETECT
7 7: TITLE
8 8: TITLE SET
9 9: RANDOM TRIGGER
10 10: HI-RESO
Press
MENU
Press
OPERATE
ENTER
FUNC2 /SET
D
or ) to
Display
to advance to the next item.
to go back to the previous item.
o CAMERA MODE (CAM/BARS/NEGA)
●
Selects the camera's video output.
1.
Select A1: CAM MODEB using MENU button B.
1 : CAM MODE
Output mode indication
2.
Select output mode, CAM (camera output),
BARS (color bars signal) or NEGA (negative
signal) using FUNC2 button D.
FUNC2
o CONTOUR MODE (ON/OFF), CONTOUR
LEVEL CONTROLS
●
Set to ON to correct contour or to OFF when
contour correction is not required. When set to
ON, the contour correction level can be
adjusted within a range of –99 to +99.
1.
Select A2: CONTOURB using MENU button B.
2 : CONTOUR
Mode indication
2 : CONTOUR
0
Level
2.
Set ON or OFF using FUNC2 button D.
To adjust contour
level in the + direction.
To adjust contour
level in the – direction.
3.
When set to ON, the current contour level is
indicated and the contour level can be adjusted
using FUNC1 button C.
If the button is held depressed, the level will
●
vary in 10 steps.
CAM
Select output
mode.
OFF
ON
Set ON or OFF.
FUNC1 FUNC2
E-7