Connections; Operation - JVC RM-LP55 Bedienungsanleitung

CONNECTIONS

Connect the RM-LP55 to the color video camera
with the provided cable (5 m). Make sure that the
power adaptor connected to the camera is set to
OFF before making any connections.
RGB, Y/C, SYNC OUT
LENS
TRIGGER
Connect to
REMOTE connector.
RM-LP55
REMOTE CONTROL UNIT
FUNC 1 FUNC 2
W.PAINT GAIN SHUTTER IRIS MANU OPERATE
ENTER
MENU FUNC1 FUNC2 /SET
FILE W.BAL GAIN SHUTTER
FOCUS
NEAR FAR
SLOW FAST
ZOOM
WIDE TELE
SLOW FAST
WHITE PAINT IRIS
AUTO/MANU
R B
MASTER BLACK IRIS
CLOSE OPEN
RM-LP55
E-6
KY-F550
DV
VIDEO OUT
POWER
DC IN
REMOTE
SEE INSTRUCTION MANUAL
AC ADAPTER AA-P700
POWER
ON
OFF
AC adaptor

OPERATION

o ATTENTION:
1.
Make necessary connections (see
ACONNECTIONSB) and turn on the AC adaptor
connected to the camera.
2.
Set the OPERATE switch on the side of the
RM-LP55 to ON.
● AINITIALIZEB appears on the LCD panel and
then changes to A1: CAM MODEB. The
OPERATE LED will light indicating that the
remote control is ready to use.
INITIALIZE
LCD panel
NOTE:
If displayed characters are too light, remove the
cap over CONTRAST control then turn it
clockwise using a precision screwdriver. If the
display is too dark, turn the CONTRAST control
counterclockwise.