Bluetooth Mode - auna 10026418 Handbuch

Audio Setting
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor
signal-to-noise ratio (hiss).
1. To play weak stations in mono, press MENU button, turn SCROLL/SELECT knob to select Audio
setting, and then press SCROLL/SELECT knob to confirm.
2. The display will show ‚Listen in Mono only?', turn SCROLL/SELECT knob to select 'YES', and then
press SCROLL/SELECT knob to confirm.
Viewing Station Information
FM stations broadcast additional information. Press INFO button repeatedly to view information through
Radio Text, Program Type, Program Name and Date.
Storing Preset Stations
Your radio can store up to 10 of your favourite FM stations.
1. While a FM station is playing, press and hold PRESET button until display shows 'Save to Preset',
and then turn SCROLL/SELECT knob to select a preset number.
2. Press SCROLL/SELECT knob to confirm, the display will show 'Preset stored'.
3. The station is stored and the display will then show 'P#'.
Recalling a Preset Station
Press PRESET button to show the stored preset stations.
Turn SCROLL/SELECT knob to select the preset station you want to play and then press the SCROLL/
SELECT knob to confirm
Pair the unit with a Bluetooth device to listen to music:
1. Press MODE button repeatedly to select Bluetooth mode.
2. The display will flash in
3. Activate your Bluetooth device and select the search mode.
4. 'Digital Radio Station' will appear on your Bluetooth device.
5. Select 'Digital Radio Station' and enter "0000" for the password if necessary.
6. The icon will remains steadily on the display when connection is successful.
To disconnect current Bluetooth connection:
1. Press MENU button, turn SCROLL/SELECT knob to select BT disconnect, and then press SCROLL/
SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select YES, and then press SCROLL/SELECT knob to disconnect.
Note: the unit will automatically switch to standby mode after 30 minutes if the source device is disconnect,
switch off or the volume is too close to mute.
AUX IN allows for quick and easy connection to an MP3 player or other external audio sources.
1. Before connecting to the mains socket, use a 3.5mm audio cable (not supplied) to connect to your
external audio device through the AUX IN socket on the rear of unit.
m u l t i m e d i a

Bluetooth Mode

repeatedly.
AUX-IN Mode
http://www.auna-multimedia.com
23