auna 10026418 Handbuch Seite 22

Display all stations in alphanumeric order.
Alphanumeric
List currently broadcasting active stations before inactive ones.
Ensemble
Remove inactive stations from the station list.
Valid
Viewing Station Information
DAB/DAB+ stations broadcast additional information. Press INFO button repeatedly to view information
through DLS (Dynamic Label Segment), Ensemble, Program Frequency, Signal Quality, Signal Strength,
Bitrate, Codec, Channel and Date.
Storing Preset Stations
Your radio can store up to 10 of your favourite DAB/DAB+ stations.
1. While a DAB/DAB+ station is playing, press and hold PRESET button until display shows 'Save to
Preset', and then turn SCROLL/SELECT knob to select a preset number.
2. Press SCROLL/SELECT knob to confirm, the display will show 'Preset stored'.
3. The station is stored and the display will then show 'P#'.
Recalling a Preset Station
1. Press PRESET button to show the stored preset stations.
2. Turn SCROLL/SELECT knob to select the preset station you want to play and then press the
SCROLL/SELECT knob to confirm.
Selecting FM Mode
1. Press MODE button repeatedly to select FM mode.
2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise, the
last listened FM station will be selected.
3. To manually change the FM frequency, while FM frequency shows up, press TUNE button and then
turn SCROLL/SELECT knob to change the frequency by 0.05MHz per step.
4. To automatically scan, while FM frequency shows up, press TUNE button and then turn SCROLL/
SELECT knob clockwise or anticlockwise, and then press the SCROLL/SELECT knob, your radio will
skip forwards or backwards until it reached the next available station.
Scan Setting
By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio (hiss)
from weak stations.
1. To change the scan settings to stop only at stations with good signal strength, press MENU button,
turn SCROLL/SELECT knob to select Scan setting, and then press SCROLL/SELECT knob to confirm.
2. The display will show ‚Strong stations only?', turn SCROLL/SELECT knob to select ‚YES', and then
press SCROLL/SELECT knob to confirm.
m u l t i m e d i a
FM Mode
http://www.auna-multimedia.com
22