auna 10026418 Handbuch Seite 26

1. Press MENU button > Main menu > System settings > Factory Reset, press SCROLL/SELECT knob
to confirm.
2. Turn SCROLL/SELECT knob to select 'YES', and then press SCROLL/SELECT knob to confirm.
Software Update
From time to time, your radio may make software upgrades available with bug fixes and/or additional
features. If your radio detects that newer software is available, it will ask if you want to go ahead with
an update. If you agree, the new software is then downloaded and installed. After a software upgrade,
all user settings are maintained.
Before starting a software upgrade, ensure that your radio is plugged into a stable mains power connection.
Disconnecting power during a software update may permanently damage the unit.
1. Press MENU button > Main menu > System settings > Software update, press SCROLL/SELECT
knob to confirm.
2. Turn SCROLL/SELECT knob to select ‚Auto-check setting', your radio will check periodically for
new version software.
3. Turn SCROLL/SELECT knob to select ‚Check now', your radio will now to check new version
software and automatically upgrade to new software.
Setup Wizard
When this unit is started for the first time, it runs through a setup wizard to configure settings for date/
time and network. Once this has finished, the system is ready to use in most modes.
1. Press MENU button > Main menu > System settings > Setup wizard, press SCROLL/SELECT knob
to confirm.
2. Turn SCROLL/SELECT knob to select ‚YES', and then press SCROLL/SELECT knob to confirm.
Viewing System Info
This information may be requested when dealing with technical support issues.
1. Press MENU button > Main menu > System settings > Info, press SCROLL/SELECT knob to
confirm.
2. Turn SCROLL/SELECT knob to view ‚SW version', ‚Radio ID' and ‚Friendly Name'.
Setting Backlight
1. Press MENU button > Main menu > System settings > Backlight, press SCROLL/SELECT knob to
confirm.
2. Turn SCROLL/SELECT knob to select 'Power-on Level' or ‚Standby Level', then press SCROLL/
SELECT knob to confirm.
3. Turn SCROLL/SELECT knob to select backlight level, and then press SCROLL/SELECT knob to
confirm the setting.
Power-on Level
Standby Level
m u l t i m e d i a
C A U T I O N
• High
• Low
• High
• Low
• Off
http://www.auna-multimedia.com
26