Medaval MONOMETER VOICE Gebrauchsanleitung Seite 49

2. Read the Average of Blood Glucose Results:
STEP 1. When the meter is off, press and release the M button.
The screen shows " ". Keep pressing the M button for 2-3 seconds,
until blinking " " appears. Release the M button and then the 7-day
average result will appear on the screen.
What
speaks?
Thank you for using this product.
↓ Today's date is Sunday, January 18st, 2008. The time is
10:08 PM.
↓ Press main key for memory recall mode.
↓ The 7 day average is 82 milligrams per deciliter for 66 re-
cords.
STEP 2. Press the "Up" and "Down" buttons to review the 14-, 21-,
28-, 60- and 90- day average. Like the 7-day average, the 14- day
average and the times of performing test in the past 14 days will be
shown on the screen.
What
speaks?
The 14 day average is 83 milligrams per deciliter for 87 re-
cords.
96
STEP 3. Exit the memory mode, keep pres-
sing the M button and the meter will be turned
off.
PLEASE NOTE
The control solution results are NOT stored in the memory (please also go
to page 24 WARNING for information). The list of past results and the result
average are for blood glucose results only.
When using the meter for the first time, "---" is displayed when you recall the
test results or review the average result. It means that there is no test result
in memory.
What
speaks?
No memory record available.
Any time you want to exit the memory mode, keep pressing the M button for
5 seconds or leave it without any action for 3 minutes. The meter will turn off
automatically.
97