Medaval MONOMETER VOICE Gebrauchsanleitung Seite 39

WARNING
The milligram per deciliter (mg/dL) is the standard unit in the United
States. The millimole per liter (mmol/L) is the standard unit in Cana-
da. Use of the wrong unit of measure may cause you to misinterpret
your blood glucose level, and may lead to incorrect treatment.
STEP 7. Select ºC or ºF
Press the "Up" or "Down" button to select
the unit of temperature you want to use.
Press the S button and the meter will dis-
play "VOL", " " and flashing number.
What
speaks?
Temperature unit is degrees Fahren-
heit.
STEP 8. Select Speaking Function
Press the "Up" and "Down" buttons until
you hear the desired speaking volume.
Number 0 indicates that the speaking
function is turned off, where " " does not
display on LCD during testing. Number 1
to 7 indicates speaking volume from low
to high, where " " displays on LCD during
testing. Press the S button and the meter
will display "dEL" with flashing "
bol.
What
speaks?
Voice volume is 7.
76
" sym-
STEP 9. Delete the Memory
When "dEL" and blinking " " symbol is displayed, if you do not want
to delete memory, press the S button again to skip this step and turn
off the meter. If you would like to delete ALL memory, press the "Up"
button twice. " "and " " are displayed on the meter, which means
that all data stored are deleted. The memory of this meter is empty
now. The meter will automatically turn off.
What
speaks?
Delete memory record function. Press up key to clear all records.
↓ Are you sure you want to delete ALL records? Press up key
again to clear all records.
↓ All memory records have been deleted.
↓ Have a nice day.
PLEASE NOTE
The time, date, unit of measurement and unit of temperature can
ONLY be changed in the setting mode. Therefore, when you per-
form a glucose testing, those parameters are not possible to be
changed.
Your meter displays 7-, 14-, 21-, 28-, 60- and 90-day averages
which you can access from the meter memory. These averages are
calculated from results obtained during the 7-, 14-, 21-, 28-, 60-
and 90-days preceding the current date and time settings. When
the date and time are changed, the 7-, 14-, 21-, 28-, 60- and 90-
day averages may change.
While the meter is in the setting mode, if no button is pressed for 3
minutes, the meter will turn off automatic all y.
77