Eec Conformity Explanation; Warranty; Technical Data - Bresser 51-02000 Bedienungsanleitung

non-optical parts of the microscope (e. g. the frame or the
stage). Firstly, remove dust or dirt from your microscope, or
accessories, using a soft brush. Then clean the soiled area
with a soft, lint-free cloth; the cloth may be moistened with
a mild detergent solution. Be sure that the microscope is
dry before using. For cleaning the painted parts or plastic
components, do NOT use organic solvents such as alcohol,
ether, acetone, xylene or other thinner etc.!
4. Cleaning optical parts
In order to enhance the optical quality, the lenses of eye-
pieces or objectives are coated. They should not be wiped
because dry dirt or dust may scratch the coating. It is best
to remove the parts to be cleaned from the frame prior to
cleaning. Always blow loose dust away first. Use lens tissue
of good quality or soft fabric moistened with a small amount
of pure alcohol (available in the chemist's shop); wipe the
lens surface clean.
5. Cleaning the oil immersion lens
After working with oil immersion, the immersion oil should
be removed from the lens of the 100x objective at the end
of each workday. In order to do this, use a lens tissue moi-
stened with a small amount of pure alcohol (available in the
chemist's shop). Don't forget to clean the preparation, too.
6. Being not used
After usage, cover the microscope with the dust cap (made
of plastic) and place it where it is dry and mouldless. In
the case of non-use for a longer time, you should stow the
microscope and the accessories in their correct containers
again. We suggest the storage of all objectives and eyepi-
eces in a closed container with drying agent.
Remember:
A well maintained microscope will keep its optical quality
for years and thus maintain its value.

11. Technical data

Monocular head
Mechanical desk (with vernier alignment)
Eyepiece: DIN WF 10x
Objectives: DIN 4x / 10x / 40x / 100x oil
Magnification: 40x -1000x
Illumination: Accu-LED
Accessories: Immersion oil
Technical alterations and errors excepted.
Aperture:
The numerical Aperture (the unit of measurement for the
resolution factor of the objectives) is engraved beside the
magnification-sign on the objectives.
The magnification for microscopes
is calculated by formula:
Eyepiece magnification x objective magnification factor =
total magnification
Example: 10x eyepiece x 100x lens = 1000x total magnifi-
cation

12. EEC Conformity explanation

Meade Instruments Europe GmbH & Co. KG, resident in
46414 Rhede/Westf., Gutenbergstr. 2, Germany, explains the
agreement with in the following specified EEC guidelines for
this product:
EN 61558-2-6: 1997
EN 61558-1: 1997 +A1
Product description: Biological-type microscope
Model: BRESSER Erudit DLX
Rhede, 20th July 2007
Meade Instruments Europe GmbH & Co. KG
Helmut Ebbert
Managing director

13. Warranty

The period of warranty is 2 years, beginning on the day
of purchase. Please keep the cash receipt as evidence of
purchase. Devices which become defective during the warran-
ty period can be returned to the dealer where the device was
bought. The repaired device or a new one will then be returned
to you. In the case of defects which occur after the end of the
warranty period, the devices can also be returned. However,
repairs which become necessary after the end of the warranty
period will be subject to a service fee.
Important:
Make sure to return the device carefully packed in the
original packaging in order to prevent transport damage.
Please also enclose the cash receipt (or a copy). This
warranty does not imply any restriction of your statutory
rights.
Your dealer:
Name: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Postcode / City: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Street: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Telephone: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Date of purchase: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Signature: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
- 6 -