Eec Conformity Explanation; Maintenance; Warranty - Bresser Science IVM-401 Bedienungsanleitung

11. Exchange of the fuse (Fig. 9)
Sicherung
Switch off the power switch (Fig. 2, No. 27) and pull out the
mains plug from mains socket and the power supply plug (2)
from mains in (3). Take out the fuse holder (1): Grip with a small
screwdriver under the lug of the fuse holder (Fig. 9, arrow) and
pull it carefully forwards. Change the fuse. Install the fuse hol-
der and plug again.
The specification of fuse: 250 V / 0,5 A, F.
12. Use of culture utensil (Fig. 1)
While you use the tall culture utensil for observation, push the
condenser stage tray (15) from the light path.
V. MAINTENANCE
1. Sweep the lens
Sweep the lens by lens tissue or soft fabric immersed with a
mixed liquid of alcohol/ether. Clean the 100x objective from oil
whenever you finish operating.
2. Clean the painted parts
The dust on the painted parts can be removed by gauze. For
the grease spots, the gauze immersed slightly with aviation
gasoline is recommended. Do not use organic solvents such
as alcohol, ether or other thinner etc. for cleaning the painted
parts or plastic components.
3. Avoid disassembling the microscope
Because of being a precise instrument, do not disassemble
the microscope casually. That may cause serious damage to
its performance.
4. Being not used
Cover the microscope with the dust cover and place it there,
where it is dry and mouldless. We suggest the storage of all
objectives and eyepieces in a closed container with drying
agent.
J
B
C
D

EEC CONFORMITY EXPLANATION

Bresser GmbH, resident in 46414 Rhede/Westf.,
Gutenbergstr. 2, Germany, explains the agreement with in the
following specified EEC guidelines for this product:
EN 61326
EN 2001+A2: 2005
Product description: Transmission-type Inverted Microscope
Model: BRESSER Science IVM-401
Rhede, Juli 20, 2007
Bresser GmbH
Helmut Ebbert
Managing director

WARRANTY

The period of warranty is 2 years, beginning on the day of
purchase. Please keep the cash receipt as evidence of pur-
chase. Devices which become defective during the warranty
period can be returned to the dealer where the device was
bought. The repaired device or a new one will then be retur-
ned to you. In the case of defects which occur after the end
of the warranty period, the devices can also be returned. Ho-
wever, repairs which become necessary after the end of the
warranty period will be subject to a service fee.
Important:
Make sure to return the device carefully packed in the origi-
nal packaging in order to prevent transport damage. Please
also enclose the cash receipt (or a copy). This warranty does
not imply any restriction of your statutory rights.
Your dealer:
Name: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Postcode / City: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Street: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Telephone: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Date of purchase: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Signature: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
11