Replacing The Battery Pack; Audio And Visual Indicators; Headset's Audio Indicators; Headset's Visual Indicators - Jabra GN9300e Benutzerhandbuch

Important: During everyday use, the base's leftmost indicator will flash when there is less than 30 minutes
of talk time left.
GN9350e GN9330e GN9330e USB

6.2 Replacing the battery pack

The headset's battery pack can be changed when required.
To replace the battery pack on a wearing style:
1. Unclip the wearing style from the battery pack.
2. Slide the backside of the headset speaker-housing
downwards.
3. Slide the new battery pack (from the extra battery
charging facility) onto the headset.
The headset's link indicator will light for 2 seconds to
confirm successful replacement of the battery pack. This also confirms that the battery has
sufficient charge to operate.
4. Replace the wearing style.
5. Recharge the empty battery by sliding it into the extra accessory charging cradle.

7. Audio and visual indicators

The headset and base have audio and visual indicators that represent various functions
associated with setting up and using the product.
GN9350e GN9330e GN9330e USB
7.1 Headset's audio indicator
Headset action
Low battery
Volume up/down
Volume max/min reached
Incoming call (with RHL functionality)
Incoming call (with VoIP call)
Conference call request
Conference call accept
Telephone line (open/close)
Headset out of range
Mute activation/deactivation
Mute activated
www.HeadSetPlus.com
Audio indication
5 rapid beeps + 20 second pause
1 quick beep in increasing/decreasing intensity
1 rapid shrill/low beep
Rapid multi-tone + 2 second pause (repeats)
Depends on VoIP application
4-pitch tone
1 beep
1 beep
3-pitch tone
1 beep
2-pitch tone + 10 second pause (repeats)
18
GN9350e GN9330e GN9330e USB

7.2 Headset's visual indicators

Visual indication
Link indicator (blue)
Lit for 2 seconds
Lit (during adjustment)
Flashing rapidly
GN9350e GN9330e GN9330e USB

7.3 Base's visual indicators

Base action
Telephone mode button's indicator/
Base talk button
USB mode button's indicator/Base talk button
Mute functionality indicator (red)
Battery indicator (4 green diodes)
Battery indicator (chargecradle for
additional battery, GN accessory)
Headset action
Flashing when linked up
Successful pairing, including adding headsets in conference mode
Receive volume reorientation (+/-) is being adjusted
Headset in DECT/GAP mode
Visual indication
Lit when in telephone mode and flashing when linked up
Lit when in USB mode and flashing when linked up
Lit when mute is activated
1 indicator light = 25% of a full charge
2 indicator lights = 50%
3 indicator lights = 75%
4 indicator lights = 100% full charge
Rightmost lit diode flashes when charging, leftmost diodes are lit
Leftmost diode flashes when <30 minutes of talk time remaining
When headset placed in cradle for charging, all diodes light for
1 second
Lit when charging, green diode
www.HeadSetPlus.com
19