Before First Use - tepro ELGIN Bedienungsanleitung

t
7. Stick the plug of the temperature
controller (7) into the connection socket
(6) until it stops.
8. Place the hood
adjustable steam outlet (2) and the
insulating plate (2a) onto the hood (4)
and connect it with the screw (3) from
inside the hood. Ensure that the pivot of
the hood handle is sitting in the recess
of the steam outlet (2).
Please note:
Steps 2 to 4 are not necessary if the device
is used as a table BBQ.
22
handle (1), the

Before first use

1. Clean the BBQ plate, drip pan and
hood, as described in the section
Maintenance and Cleaning .
2. Place the device on an even, dry, and
non-slip surface.
3. If the device is used as a table BBQ,
it must be placed on a heat-resistant
pad.
4. Remove the lid and rub the BBQ plate
thinly with cooking oil.
5. Set the temperature controller (7),
counterclockwise, to 0.
6. Connect the mains plug to a suitable
socket.
7. Set the temperature controller to the
highest level. The indicator light (8)
lights up and the device heats up. The
heating time is approx. 5 minutes. As
soon as the device has heated up, the
indicator light goes out.
8. Let the device heat up for approx.
10 minutes without food and with a
closed hood, in order to burn away
production residues.
9. When first used, a small amount of
smoke and a corresponding odour
may be produced. This is a normal
process and is caused by the burning
away of production residues. The
smoke and the odour disappear
after a brief time. Ensure the room is
sufficiently ventilated.
10. The device is ready for use.