Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Due to our effort to innovate and improve our amplifiers, this modern digital
Caliber Competition Pro amplifier offers you the following features:
•
Pulse Width Modulated (PWM) MOSFET Power Supply.
•
1 Ohm Stable.
•
Double-sided epoxy board for jumperless signal paths.
•
Variable input sensitivity 500mV to 15V.
•
Thermal, Overload and Short-circuit protection.
•
Excellent muting circuitry assures no turn on/off 'pops'.
•
Built-in adjustable Low Pass Filter 50 - 250Hz.
•
Built-in adjustable Subsonic Filter 20 - 50Hz.
•
On/Off switch for built-in Subsonic Filter
•
Differential inputs to shunt any input noise.
•
Signal output RCA's for additional amplifier(s).
•
Large power supply connectors for optimal power distribution.
•
European design and engineering.
•
Superb Sonic performance for your 'Dream Machine' on wheels.
•
Years and years of acoustic pleasure.
•
Digital Remote Control for the sub-woofer level.
•
CSS entrance for optional Caliber Control System.
2
Digital Amplifier specifications.
CA 2010D Pro
Maximum Power Output at 13V
4 Ohm
2 Ohm
1 Ohm
Continuous Power Output at 13V
4 Ohm
2 Ohm
1 Ohm
Low Pass Filter
Subsonic Filter
Frequency response (+0, -1dB)
Total Harmonic Distortion
Signal to noise ratio (A-Weighted)
Input Sensitivity
Output Impedance
Fuse Rating
Dimensions (WxHxD mm)
1x 800W
1x 1600W
1x 2000W
1x 400W
1x 800W
1x1000W
24db/Oct. 50 - 250Hz
24db/Oct. 20 - 50Hz
10Hz - 250Hz
<0,44% with 80kHz Bandpass
>70dB
500mV - 15V
1 - 4 Ohm
80A
300 x 90 x 235
3
Werbung
Inhaltsverzeichnis
