Abus TVIP10000 Bedienungsanleitung Seite 86

Interval:
Time zone:
Daylight Saving Time:
Accept the settings by pressing "OK" or cancel them by pressing "Cancel".
Initialize
Reboot:
Factory default:
Backup setting data:
Restore setting:
Firmware upgrade:
Upload language pack:
Update interval with the time server (in hours).
Select the time zone where the camera is located here.
Enter the data for the switch from summer time to winter time.
The camera is restarted by pressing this button.
The factory settings of the camera are loaded by pressing this button. The
selection must be confirmed.
A back-up copy of all camera settings can be saved here.
The settings saved in a back-up file can be loaded here.
A more up-to-date version of the camera firmware can be loaded here.
Information on updated firmware files can be found in the Software section under
http://www.abus-sc.com.
A different language can be set here by uploading a language file. German is the
standard language on the camera following delivery.
The language file for the camera can also be uploaded using the supplied IP
Installer. This can be installed in the appropriate language. Language files for
German, English, French, Dutch and Danish can be downloaded from the
Software section under http://www.abus-sc.com.
86
English