Abus TVIP10000 Bedienungsanleitung Seite 114

The settings can be tested using the "Test" button. Accept the settings by
pressing "OK" or cancel them by pressing "Cancel".
Alarm sending
Alarm sending:
Image file name:
Suffix:
Delete sequence number:
Alarm:
Motion detection:
Audio detection:
Network link down:
Alarm input:
Recording time:
Effective Period:
Always: The detectors for these alarms are permanently activated.
Schedule: The detectors for these alarms are activated at defined schedules. Press the
"Schedule" button to configure these settings (see also the "Schedule" section).
Activates or deactivates the storage of image data (snapshots) on a network
drive after an event.
Assign a file name for image data storage here. A maximum of 10 letters or
digits are permitted. "_" and "-" can also be used as characters.
The file attachment suffix can be a date and time or a sequence number.
Resets the sequence number to 1.
Select the event which triggers the storage procedure on the network drive.
All set activity masks.
The activated audio detector.
Limited network connections. The configured alarm buffer can be used (see the
"Alarm buffer" section).
The activated digital input can represent the trigger.
Select the recording time on a network drive following an event (5-60 seconds).
114
English