Abus TVIP10000 Bedienungsanleitung Seite 109

The settings can be tested using the "Test" button. Accept the settings by
pressing "OK" or cancel them by pressing "Cancel".
Alarm sending
Alarm sending:
Remote path:
Image file name:
Suffix:
Delete sequence number:
Alarm:
Effective Period:
Always: The detectors for these alarms are permanently activated.
Schedule: The detectors for these alarms are activated at defined schedules. Press the
"Schedule" button to configure these settings (see also the "Schedule" section).
Accept the settings by pressing "OK" or cancel them by pressing "Cancel".
Activates or deactivates the transmission of image data to an FTP server.
This is the file folder where the images are saved on the FTP server. The
maximum length is 64 characters.
Specify the file name for the image/video file here.
Select the file suffix here. This can be the date and time or a sequence
number.
Resets the sequence number to 1.
In the event of an alarm, certain reactions can be configured for FTP
transmission here. A button for configuring the corresponding alarm detector is
available for each entry (if configuration of the detector or trigger is possible).
109
English