auna KR-200 Bedienungsanleitung Seite 38

further RDS information such as programme name, track title and contact details. If no informationis available, just the
frequency is shown. Stereo broadcasts are indicated with an icon at the top of the screen, To view further information
about the broadcast, press INFO.
Each time you press INFO, another set of information is displayed, cycling through RDS text, further RDS text (station/
programme type), frequency and today's date.
Settings
• Scan settings
By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio (hiss) from weak
stations. To change the scan settings to stop only at stations with good signal strength, select Yes after choosingS-
trong station only?
• Audio settings
All stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-to-noise ratio (hiss).
To play weak stations in mono, select FM weak reception: Listen in mono only and then YES.
Aux in mode plays audio from an external source such as an MP3 player. To play audio with Aux in mode:
• Turn the volume low on both unit and, if adjustable, the audio source device.
• Connect the external audio source to the Aux in 3.5mm stereo socket.
• Either press MODE until the display shows AUX IN or select AUX in under Main menu.
• Adjust the volume of the unit(and, if necessary, the audio source device) as required.
Sleep
To set the sleep timer, select Sleep under Main menu or press SLEEP on the remote control. Choose from Sleep OFF,
15 MINS, 30 MINS, 45 MINS or 60 MINS.
Once you select a sleep period, the system returns to the main menu. Press MENU to return to the Now playing screen.
Alarm
There are two versatile wake-up alarms with snooze facility, and a sleep function to turn the system off after a set
period. Each alarm can be set to start in a particular mode. Select Alarms under Main menu to set or change an alarm.
AUX IN
Sleep & Alarm
38