Controls, Connections And Displays - Fohhn ABX-3 Bedienungsanleitung

3.3 CONTROLS, CONNECTIONS AND
DISPLAYS
FRONT
2 3
1
(1) AIREA-NET INPUT
The AIREA-NET cable coming from the AIREA MASTERS is
plugged in here.
(2) ERROR LED
The red LED is lit if no audio signal is detected.
(3) ON LED
The green LED is lit if an audio signal is detected.
(4) DSP ENABLED LED
The green LED is lit if the FOHHN DSP is activated.
(5) POWER LED
The green LED is lit if a supply voltage is present.
(6) AIREA-NET OUTPUTS
Used for AES/EBU- and FOHHN-NET control signal output. Further
AIREA devices can also be connected here.
(7) FOHHN-NET OUTPUT
This output carries the FOHHN-NET control signals.
(8) RECEIVE LED
The green LED is lit if control data is received.
(9) SEND LED
The yellow LED is lit if ABX-3 control data is sent.
(10) ON LED
The blue LED can be switched on and off via FOHHN AUDIO SOFT
and also serves to identify the device.
(11) ANALOG OUTPUTS
Used for analogue signal output.
4 5
6 6
ABOUT THE PRODUCT | ENGLISH
BACK
8
7 9 10 11 11
17