Sony KE-42MR1 Gebrauchsanweisung Seite 36

SmartLink
AV4 Input Select Select the "AV4 Input Select" option if a DVD recorder is connected
Menu Colour
Logo
Illumination
36
Menu System
The "SmartLink" option allows you to select a Scart connector that
supports SmartLink. Both Scart connectors
cannot support SmartLink at the same time.
To do this:
1 After selecting the option, press
2 Press or to select AV3 or AV4.
to both the Scart connector
5.
Some DVD recorders may have 576p signal format. The Scart
connector does not accept 576p signal format on its own. If
you wish to input the signal just as it is, connect the DVD
recorder to both the Scart connector
C , P /C jacks of
B R R
To do this:
1 After selecting the option, press
2 Press or to select Auto or Manual.
Auto: The signal from the DVD recorder is input via the Scart
4/ .
Manual: The signal from the DVD recorder is input via the Y,
P /C , P /C
B B R R
DVD recorder is 576p signal format, select this.
The "Menu Colour" option allows you to alter the background
colour of the menus.
To do this:
1 After selecting the option, press
2 Press
or to select White or Black.
The "Logo Illumination" option allows you to illuminate the SONY
logo on the front panel of display unit in blue.
To do this:
1 After selecting the option, press
2 Press
or to select Yes.
.
4/ and Y, P
5.
.
jacks of 5. If the input signal from the
.
.
3/ and 4/
S
/C , P /C jacks of
B B R R
4/ and Y, P /
B