Sony KE-42MR1 Gebrauchsanweisung Seite 21

2
Secure the mains plug to the display's AC IN jack.
AC IN (Power supply
input) jack of the
display unit
Mains lead
(supplied)
a Attach the mains plug holder
(supplied) to the mains lead.
To unplug the mains lead pull down the mains plug holder by pushing in both sides of
the holder, then pull out the plug.
3
Install the display unit using the specified wall-mount bracket or stand.
Before installing the display unit, check the installation instructions of your wall-mount
bracket or stand.
4
Connect the supplied display interface cable to the media receiver unit.
Mains plug
holder
(supplied)
1/ 3/ (SMARTLINK)
2/ 4/ (SMARTLINK)
BLACK
DISPLAY SIGNAL OUT
b Clip on the AC IN jack until you
hear clicking.
5 5
R/D/D/D L/G/S/I Y P /C P /C
B B R R
AC IN
R/D/D/D L/G/S/I W/G/W/G
CENTRE
SPEAKER IN
CTRL AV
WHITE 180W (6 ) MAX
S MOUSE
GB
21
Installation