Panasonic CS-Z25UB4EAW Bedienungsanleitung Seite 21

When...
■ The remote control is missing or a malfunction has occurred
1. Press the button once to use in AUTO mode.
2. Press and hold the button until you hear 1 beep, then release to use in
3. Repeat step 2. Press and hold the button until you hear 2 beeps, then
POWER
TIMER
POWERFUL
4. Repeat step 3. Press and hold the button until you hear 3 beeps, then
QUIET
AUTO
AIR SWING
5. Press the button again to turn off.
■ The indicators are too bright
• To dim or restore the unit's indicator brightness, press
■ Conducting a seasonal inspection after extended non-use
• Check the remote control batteries.
• Check that there is no obstruction around the air inlet and outlet vents.
• Use Auto OFF/ON button to select COOL/HEAT operation. After 15 minutes of operation, it
is normal to have the following temperature difference between the air inlet and outlet vents:
COOL: ≥ 8°C / 14.4°F
■ The units are not going to be used for a long period of time
• Activate HEAT mode for 2~3 hours to remove moisture left in the internal parts thoroughly to
prevent mould growth.
• Turn off the power supply and unplug.
• Remove the remote control batteries.
NON SERVICEABLE CRITERIA
TURN OFF THE POWER SUPPLY then please consult an authorised dealer when in
following conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the remote control.
• Water leaks from Indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
• Switches or buttons are not functioning properly.
ACXF55-17710_book1.indb 21 ACXF55-17710_book1.indb 21
forced COOL mode.
release to use in normal COOL mode.
release to use in forced HEAT mode.
HEAT: ≥ 14°C / 25.2°F
and hold for 5 seconds.
12/14/2017 3:59:40 PM 12/14/2017 3:59:40 PM
21