Technical Data; Noise & Vibration - Pattfield PE-2350WS Originalbetriebsanleitung

Technical Data

Nominal voltage
Rated power
Rated speed (n)
Size of wheel
Spindle size
Protection Class
Sound pressure level (L
Sound power level (L
wA
Max. vibration emission (a
The values given are valid for nominal voltages U of 230 V. For lower voltage and models for
specific countries, these values may vary.
Please observe the article number on the type plate of the tool. The trade names of the individual
tool may vary.
Noise & Vibration
The values given in these instructions have
been measured in accordance with a stand-
ardized measurement procedure specified in
EN 60745 and can be used to compare tools.
It may be used for a preliminary assessment
of exposure. The declared vibration data rep-
resents the main applications of the tool, but
different uses of the tool or poor maintenance
can result in different vibration data. This may
significantly increase the vibration level over
the total working period.
An estimation of the vibration level should
also take into account the intervening periods,
when the tool is switched off or it running but
is not actually in use. This can result in a much
lower vibration load over the whole working
period.
Additional safety measure can be taken to
protect the user from effects of vibration:
Maintain the tool and its accessories, keep the
hands warm and organize work patterns.
)
pA
)
)
h,AG
230-240 V / ~50 Hz
2350 W
6500/min
ø 230 mm
M14
/ II
93 dB(A) / Uncertainty K = 3 dB(A)
104 dB(A) / Uncertainty K = 3 dB(A)
4.89 m/s / Uncertainty K = 1.5 m/s
2 2
EN 103