Product Overview; Intended Use; Technical Data; Using The Tool - Pattfield PES240G Bedienungsanleitung

Product overview

1 Speed dial
2 0 button
3
I button
4
Sanding pad
5 Adapter
6 Dust box
7 Latch
8 Cover
9 Power cord

Intended use

The tool is intended for dry sanding of wood,
plastic, metal and coated surfaces. It is not
suitable for plaster or drywall filler. The tool is
not intended for commercial use.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.

Technical Data

Nominal voltage
Rated power
No-load speed (n )
0
Base plate (ø)
Orbit (ø)
Weight
Protection Class
Sound pressure level (L
Sound power level (L
Max. vibration emission (a
86 EN
)
pA
)
wA
)
h

Using the tool

1. Place the tool on the workpiece so that the
entire sanding paper is in contact with it.
Make sure your workpiece can not slip.
2. To switch on the tool, press the I button 3.
Start working, while holding the tool firmly
with both hands.
3. Move the tool slowly over the workpiece in
parallel lines, circles or crosswise move-
ments and successive passes.
4. To switch off the tool, press the 0
Warning! Only switch on the tool
when the sanding paper is in full
contact with the workpiece.
230-240 V~50 Hz
240 W
1 = 6000/min - MAX = 12000/min
125 mm
0
2. mm
1.38 kg
/ II
77 dB(A) / Uncertainty K = 3 dB(A)
88 dB(A) / Uncertainty K = 3 dB(A)
14.0 m/s / Uncertainty K = 1.5 m/s
2
button 2.
2