Caractéristiques Techniques; Proper Use - Conrad Electronic REF 6.0 Bedienungsanleitung

Caractéristiques techniques
Modèle:
Impédance:
Bande de fréquence:
Pression acoustique (1W/1m):
Puissance admissible (RMS/max.):
20
REF 4.2 REF 6.0 REF 10.0
4 ohms 8 ohms 8 ohms
60–25.000 Hz 45-22.000 Hz 20–22.000 Hz
84 +/-2 dB 86 +/-2 dB 88 +/-2 dB
20/60 W 50/125 W 80/200 W
Introduction
Dear customer,
we would like to thank you for buying these loudspeakers.
With this product you have purchased loudspeakers which were built according to
state-of-the-art technology.
This product meets the requirements of the valid European and national guide-
lines.
In order to preserve this condition and to ensure safe operation, you as the user have
to strictly observe this operating manual.
In case of questions, consult our technical information service
Germany: Tel. 0180/5 31 21 18 or 09604/40 88 46
Fax 09604/40 88 44
e-mail: tkb@conrad.de
Mon - Fri 8.00 to 18.00
Austria: Tel. 0 72 42/20 30 60 · Fax 0 72 42/20 30 66
e-mail: support@conrad.at
Mon - Thu 8.00 to 17.00
Fri. 8.00 to 14.00
Switzerland: Tel. 0848/80 12 88 · Fax 0848/80 12 89
e-mail: support@conrad.ch
Mon - Thu 8.00 to 12.00, 13.00 to 17.00
Fri 8.00 to 12.00

Proper use

The loudspeakers' purpose is to convert electronic output signals of audio amplifiers
into audible sound waves; these loudspeakers are only approved for the connection
to loudspeaker output ports of audio amplifiers.
They may only be used indoors and not outdoors. You must avoid any contact with
moisture or humidity as for example in bathrooms or similar rooms.
9