Troubleshooting Guide - Gardol 34.200.31 Originalbetriebsanleitung

9. Troubleshooting guide

Fault
The motor does not
start
Engine does not run
smoothly
The equipment
does not operate
smoothly and vibra-
tes intensively
Motor is running,
roller is not rotating
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers
accompanying products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes
Anl_GBV_E_35_SPK7.indb 25 Anl_GBV_E_35_SPK7.indb 25
GB
Possible causes
- Engine start/stop lever not activated
- Spark plug defective
- Fuel tank empty
- Air fi lter dirty
- Spark plug worn
- Cutting unit/aerator roller imbalan-
ced
- V-belt torn
- 25 -
Remedy
- Press the engine start/stop lever
- Replace spark plug
- Top up fuel
- Clean the air fi lter
- Clean/Replace the spark plug
- Replace the cutting unit/aerator rol-
ler
- Have the V-belt replaced by a cus-
tomer service workshop.
14.10.2016 08:01:41 14.10.2016 08:01:41