Application Example; Maintenance And Service; Maintenance And Cleaning - Bosch RC 1 Professional Originalbetriebsanleitung

OBJ_BUCH-934-004.book Page 15 Tuesday, May 17, 2016 12:49 PM
English | 15
Press button 4 to rotate in clockwise direction, and button 5 to rotate in anticlockwise
direction.
Reset Shock-warning Function
The rotational laser has a shock-warning function; after position changes or shock to
the rotational laser, or in case of ground vibrations, it keeps the rotational laser from
levelling in at changed heights, and thus prevents vertical errors.
Switching the shock-warning function on and off is possible only on the rotational la-
ser. Once the shock-warning function has actuated, is can be restarted via the remote
control.
After actuation of the shock-warning function, the rotation of the laser is stopped, the
laser flashes, the levelling indicator goes out, and the shock-warning indicator flashes
red. The current operating mode is stored.
After the shock-warning function has actuated, press the shock-warning reset button
3. The shock-warning function is restarted and the rotational laser starts levelling. As
soon as the rotational laser is levelled in (the levelling indicator on the rotational laser
continuously lights up green), it starts in the stored operating mode. Now, check the
height of the laser beam with a reference point and correct the height, if required.

Application Example

Turning the Rotational Plane when in the Vertical Position (see figure B)
To align the vertical laser line or the rotational plane against a reference point on a
wall, set up the rotational laser in the vertical position, and roughly align the laser line
or the rotational plane with the reference point. For precise alignment with the refer-
ence point, press button 4 (clockwise rotation) or 5 (anticlockwise rotation).

Maintenance and Service

Maintenance and Cleaning

Keep the remote control clean at all times.
Do not immerse the remote control into water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or sol-
vents.
If the remote control should fail despite the care taken in manufacture and testing, re-
pair should be carried out by an authorised customer services agent for Bosch power
tools. Do not open the remote control yourself.
Bosch Power Tools 1 609 92A 26R | (17.5.16)