Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USER MANUAL
Thank you for purchasing this speaker pair for wall mounting. The speakers are
protected against dust and water jets and thus can be used in outdoor areas.
connection must be made by skilled personnel only.
instructions carefully before using the product. They contain important
information for the correct use of your product. Please keep them for future
reference.
SAFETY INSTRUCTIONS
Only use the product according to the instructions given herein. Damages due
to failure to follow these operating instructions will void the warranty! We do not
assume any liability for any resulting damage.
We do not assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions. In such cases,
the warranty/guarantee will be null and void.
Unauthorized rebuilds or modifications of the product are not permitted for
reasons of safety and render the warranty invalid.
This product is not a toy. Keep it out of the reach of children. Do not leave
packaging material lying around carelessly.
This product is in accordance with protection grade IP65 and can be used in
outdoor areas. However, do not immerse the product in water, this will destroy
it.
Protect the product against excessive humidity and heat. The recommended
temperature is -5 to +45°C.
Speaker cables are sensitive to electrical interference. Hence, it is
recommended to lay them at a distance of several meters to sources of
interference (e.g. dimmers, light switches).
Make sure that the product is installed securely and cannot fall down. Serious
injury to persons can be caused if the speakers fall down. Comply with the
standards and rules that apply in your country.
For commercial use the country-specific accident prevention regulations of the
government safety organization for electrical facilities must be complied with at
all times.
Make sure that impedance and power rating specified in the technical data
match the connected amplifier's data. Otherwise, the speakers or the amplifier
may be damaged. The total impedance for the connected speakers must not be
less than the minimum impedance for the amplifier.
This product is maintenance-free, except for occasional cleaning. You can use
a slightly dampened cloth for cleaning.
Never open the product. If this product is no longer working properly or is
visibly damaged, take it out of operation and consult your local dealer. Do not
attempt to repair the product yourself.
PROTECTING THE ENVIRONMENT
When to be definitively put out of operation, take the product to a local
recycling plant for a disposal which is not harmful to the environment.
Devices marked with this symbol must not be disposed of as household
waste. Contact your retailer or local authorities for more information.
© 2017 Omnitronic. All rights reserved • Omnitronic is a brand of Steinigke Showtechnic GmbH • Andreas-Bauer-Str. 5 • 97297 Waldbüttelbrunn, Germany
The
Please read these operating
PS-2.5WB
WEATHER-PROOF PROJECTOR SPEAKER
INSTALLATION
Mount the speakers to the wall using the supplied accessories (see separate
installation instructions).
Turn off the amplifier before making any connection.
Connect the speakers to the amplifier outputs with a suitable speaker cables
(black clamp = negative pole, red clamp = positive pole).
When connecting several speakers, make sure that all speakers have the same
polarity and that the amplifier is not overloaded.
TECHNICAL SPECIFICATIONS
Item numbers:
80710376 (white), 80710377 (black)
Protection grade:
IP65
Rated power:
70 W RMS
Program power:
140 W
Speaker:
6 cm (2.5")
Connection:
Clamps
Sensitivity:
88 dB (1 W, 1 m)
Impedance:
8 ohms
Frequency range:
150 Hz - 22 kHz
Dimensions (LxWxH):
100 x 95 x 122 mm
Weight (piece):
0.5 kg
Subject to change.
www.omnitronic.de
D110620
Werbung
