Using your INTU
New Atomizer Installation:
When a new atomizer is connected, or the existing atomizer is disconnected and
reconnected, a message prompt may be displayed – 'New Coil Up, Same Coil Down' .
Press the up adjustment button to confirm that a new atomizer has been connected,
or the down adjustment button to confirm that the existing atomizer has been
reconnected. Selection of a new coil should only be made when the atomizer and coil
are at room temperature.
Charging the Battery:
Charge the INTU via the USB cable when connected to a powered USB port or suitable
wall adapter. The indicator on the display will indicate the battery status.
5
TW_INTU_Manual.indd 5
27/07/2016 10:46:51