Totally Wicked INTU Bedienungsanleitung Seite 13

Using your INTU
Configuring TCR Mode:
To set the temperature coefficient of resistance to match a particular coil, when the
device is powered off simultaneously hold the power button and the up adjustment
button to enter the TCR configuration menu.
Use the up or down adjustment buttons to select which to configure from M1, M2 and
M3 – this feature allows the TCR values for 3 materials to be stored to the device. Press
the power button to select from M1, M2, M3 and then use the up and down adjustment
buttons to increase or decrease the value to your preference, long press the power
button or leave the device for 10 seconds to confirm the selection.
1 3
TW_INTU_Manual.indd 13 27/07/2016 10:46:51