Inhaltsverzeichnis
Werbung
Using your INTU
Custom Logo Mode:
To add a custom logo to the device, open the 'Firmware Update' software as described
in 'Updating Firmware' . Click on the 'LOGO' icon and select the 96 x 16 BMP image
file you would like to upload. To activate/deactivate logo mode, when the device is
powered off, press the power button twice in quick succession to enter the custom
logo menu, use the up or down adjustment buttons to select from On/Off.
Stealth Mode:
When powered on, simultaneously hold the power button and the down adjustment
button to activate stealth mode. Repeat the process to deactivate stealth mode.
Charge Error:
If no charging current is detected when the device is connected to the charging lead,
'Charge Error' will be displayed.
16
TW_INTU_Manual.indd 16
27/07/2016 10:46:51
Werbung
Inhaltsverzeichnis
