Using your INTU
Using your INTU
To lock the atomizer resistance, hold the power button and the up adjustment button
simultaneously. Repeat this to unlock the atomizer resistance. Note: Only lock the
atomizer when the coil is at room temperature.
Note: If a coil with a resistance exceeding 1.5ohms is applied in VT mode, the device
will automatically switch to VW mode. Also, if a standard kanthal coil is used under VT
mode, the device will automatically switch to VW mode.
1 1
TW_INTU_Manual.indd 11
27/07/2016 10:46:51