Using your INTU
Low Voltage Protection:
When the battery voltage is below 3.1V, 'Battery Low' will be displayed on the screen.
If following this message, the button is continually pressed, the message 'Battery Low
Lock' will be displayed and the device will not operate. To unlock and activate the device
the battery must be recharged.
Weak Battery Alert:
If battery voltage drops below 3.3V, the device will display 'Weak Battery' . The output
power will automatically be reduced accordingly. If this occurs, fully recharge the
battery, if this does not resolve the issue then a new battery may be required.
10 Second Protection:
If the power button is pressed for longer than 10 seconds, the output will automatically
cease and the message 'Over 10s Protection' will be displayed.
18
TW_INTU_Manual.indd 18
27/07/2016 10:46:51