Herunterladen Diese Seite drucken

Jamara Islander EP Gebrauchsanleitung Seite 5

Werbung

Bestreichen Sie die Tragflächenverstärkung mit Epoxy und
kleben Sie diese auf die Tragflächenoberseite.
Apply some epoxy on the wing-reinforcing cover and secure it on
the top of the main wing.
Befestigen Sie das Servokabel an der Einzugshilfe. Nun kön-
nen Sie das Kabel durch die Tragfläche zur Mitte ziehen.
These is a guiding string preserving inside the main wing. Connect
the string with the servo cable and pull the cable through the
main wing.
Kleben Sie den Motorträger mit Epoxy in die bereits vor-
handene Aussparung an der Tragfläche ein.
Try to fit the motor inside the preserving motor hole on the main
wing and use epoxy to secure the motor mount in place.
Verlängern Sie das Servokabel mit einem Verlängerungs-
kabel.
Try to extend the main wing servo.
Montieren Sie das Servo an der Tragfläche.
Install the Servo on the main wing.
Schrauben Sie den Aluminium-Motorhalter an den Motor
und verlängern Sie das Motorkabel so, dass es insgesamt
eine Länge von 22 cm hat.
Assemble the aluminium cross stand on the motor and extend the
motor and extend the motor cable to 22 cm.
5

Werbung

loading

Diese Anleitung auch für:

00 7140