Staufenbiel MINI HAWK III REVOLUTION Montageanleitung Seite 19

11
Hold the compartment cover in place with adhesive tape or UHU POR, a quick-setting adhesive.
12
13
Apply shrink sleeves to the motor cables accor-
ding to the picture.
Thread the motor and regulator through the
fuselage, and adjust the motor so that the motor
cables run along the bottom of the fuselage.
Screw together the motor (apply Loctite). Attach
the shrink sleeve on the motor cables to the bot-
tom of the fuselage with superglue, so that the
cables cannot grind against the motor flange.
Depending on the mounting position, it might
be necessary to lengthen the regulator cable
(on the battery side) with 4qmm of cable.
EN
19
www.staufenbiel-shop.com
info@modellhobby.de
+49 40 30061950