Model Code - HYDAC SAE J1939 Bedienungsanleitung

8

9. Model code

Motion compensation
5 = Included
Electrical connection
8 = Male M12x1, 5 pole
Output signal
E
F12 = SAE J1939
Primary inclination axis (slope long)
X / Y / Z
Measuring range rotation around primary axis in °
015; 060; 120; 180
Secondary inclination axis (slope lateral)
X / Y / Z / 0 (0 = not available)
Measuring range rotation around secondary axis in °
15; 60; 90; 00 (00 = axis not available)
Additional CAN socket
0 = None
1 = Female M12x1, 5 pole
Modification Number
000 = Standard
(SAE J1939: Baud Rate: 250k CAN source address 1)
Note:
1) The calculation of the Euler angle for HIT 1500 is carried out in the order
„Slope long" → „Slope lateral".
2) Other measuring ranges on request
3) From an inclination angle about the secondary inclination axis (slope lateral) of approx.
85° onwards, the inclination angle about the primary inclination axis (slope long) is no
longer of importance and no longer definable.
Edition: 2017-06-30
HIT 1508 – F12 – X – XXX – X– XX – X – 000
HYDAC ELECTRONIC GMBH
HIT 1500 SAE J1939
1)
1)
Part No.: 669997