Description; General; Installation - HYDAC SAE J1939 Bedienungsanleitung

HIT 1500 SAE J1939

3. Description

The HIT 1500 series sensors are one or two axis inclinometers for the detection of the
inclination towards the horizontal plane.The measured inclination value is digitised and
made available to the CAN field bus system via the SAE J1939 protocol.
The instrument parameters can be viewed and configured by the user using standard CAN
software.
The inclinometers have highly precise and robust sensor cells based on MEMS.
Due to their outstanding temperature and EMC characteristics, together with their compact
dimensions, these devices can be used in a wide range of applications in the mobile
sector.

4. General

The HIT 1500 inclinometer series are subjected to calibration and final testing on a
computer operated test station. They are maintenance-free and operate perfectly when
used according to the specifications (see Technical Specifications).
However, if there is a cause for complaint, please contact HYDAC Service. Interference
by anyone other than HYDAC personnel will invalidate all warranty claims.
The protocol description can be downloaded from our internet site using the path:
→Products→Sensors→Product search
http://www.hydac.com/uk-en/products/sensors/show/Material/index.html
Entering the part number (9xxxxx) the corresponding ZIP file appears
(EDS_9xxxxx_HIT15XX-XXX-X-XXX-X-XX-X-XXX.ZIP),which contains the protocol
descriptions.
If you have any queries regarding technical details or the suitability of the unit for your
application, please contact our Technical Sales Department.

5. Installation

The inclinometer is mounted directly onto the machine via its flange plate. The mounting
location should preferably be chosen in such a way that impacts due to vibration or shock
are reduced to a minimum.
The mounting positon depends on the model code of the variant selected (primary /
secondary inclination axis or "slope long" / "slope lateral"). Cordinate system and turning
direction, please see chap. 10.
The electrical connection must be carried out by a qualified electrician according to the
relevant regulations of the country concerned (VDE 0100 in Germany).
The HIT 1500 inclinometer series is
A certificate of conformity is available on request.
The EMV standards: 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4 apply.
However, the stipulations of those standards are met only if the inclinometer's housing has
been correctly earthed by a qualified electrician.
Edition: 2017-06-30
marked.
HYDAC ELECTRONIC GMBH
5
E
Part No.: 669997