WMF KULT X Gebrauchsanweisung Seite 11

▪ Adjust the timer with the + and - (10) buttons.
▪ Change the programme by selecting another programme. In this case, the corresponding symbol
button must be tapped and held for 1 second. This prevents an accidental change of programme
from occurring.
Cleaning and care
▪ Pull out the mains plug before cleaning the appliance.
▪ Ensure that no water gets into the appliance.
▪ Never submerge the appliance, cable or plug in water or any other liquids.
▪ Do not use any cleaning agents that are abrasive or that contain benzine.
▪ Do not bring any flammable (inflammable), acidic or alkaline material or substances close to the
appliance as this could shorten the appliance's working life and a burst of flame can occur when
switching the appliance on.
▪ Wipe down the ceramic area with a damp cloth or you can use a mild, non-abrasive soap solution.
▪ Wipe down the casing and control panel with a damp cloth or you can use a mild cleaning agent.
▪ Dry the whole appliance completely before next use.
Errors
Problem: Cause:
The appliance is not working. The mains plug is not connected
to a socket.
The appliance cannot be started, There is no or unsuitable cook-
is beeping and the display is ware on the hob.
showing error message "E0".
The appliance switched itself off The appliance gets too hot.
during operation.
The set time has elapsed and the
appliance has ended the heating
process.
Display shows error message The over-/undervoltage protec-
"E01/E02". tion feature was triggered.
Display shows error message The overheating protection
"E03/E04/E05". mechanism has been triggered.
The indicator light of The appliance is on standby, the
the on/off button is on, but the heating function is not activated.
appliance isn't heating up.
The appliance was on standby The automatic shut-off feature
and switched itself off. was triggered as the appliance
was not in use.
20
Solution:
Plug the mains plug into a
socket.
Never use the appliance without
cookware. Only use cookware
that is suitable for use with
inductions hobs. Follow the
safety instructions for your
cookware.
Unplug the mains plug and clean
the ventilation slots if neces-
sary. Allow the appliance to cool
down.
If the food you are cooking is
not hot enough, extend the
cooking time.
Ensure appropriate power supply
to the appliance.
Switch off the appliance and
cool it down, unplug it from the
mains and switch it back on.
Select the type of operation, e.g.
operation by power level or by
direct select programmes.
Switch the appliance back on
when you want to use it.
For UK use only
▪ This product is supplied with a 13 A plug conforming to BS 1363 fitted to the
mains lead. If the plug is unsuitable for your socket outlets or needs to be
replaced, please note the following. If the plug is a non-rewireable one, cut
it from the mains lead and immediately dispose of it. Never insert it into a
socket outlet as there is a very great risk of an electric shock.
▪ The replacement of the plug at the mains lead has to be done according to the
following instructions:
Important: The wires in this mains lead are coloured in accordance with the
following code:
blue Neutral
brown Live
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your plug,
proceed as follows
⋅ the wire which is coloured blue must be connected to the terminal which
is marked with the letter N or coloured black,
⋅ the wire which is coloured brown must be connected to the terminal
which is marked with the letter L or coloured red.
Do not connect any wire to the terminal which is marked with the letter
E or by the earth symbol , or coloured green or green and yellow.
▪ If a 13 A (BS 1363) plug is used it must be fitted with a 3 A fuse conforming
to BS 1362 and be ASTA approved. If any other type of plug is used, the
appliance must be protected by a 5 A fuse either in the plug or adapter or at
the distribution board.
If in doubt - consult a qualified electrician.
▪ Never use the plug without closing the fuse cover.
The device complies with the European Directives 2014/35/EU, 2014/30/EU and
2009/125/EU.
At the end of its service life, this product may not be disposed of in the normal
household waste, but rather must be disposed of at a collection point for
recycling electrical and electronic devices. The materials are recyclable according
to their labelling. You make an important contribution to protecting our
environment by reusing, recycling or utilising old devices in other ways. Please ask
the municipal administration where the appropriate disposal facility is located.
Subject to change.
21